- Jackson WH50 Multiview PAPR -

- NEW from Jackson Products, the WH50 Multiview PAPR
is an airfed system featuring the Multiview welding helmet with side windows. -

The system is also available with a grinding visor version where the TL Multiview helmet can be raised to reveal a full face fully sealed grinding visor. ( See images )

Airmax Blower Unit Features

Reusable (TH2P) filter against airborne particles (solid
and liquid) with 3475cm2 area of effective filtration

Light weight – only 936g including filter, battery and belt

Flow rate range from 170-210 litres per minute for 9 hours

Removable rechargeable LI-Ion battery for a charge time of only 4 hours

Buried ON/OFF button reduces the risk of the unit switching off in use

Acoustic warning alarm alerts user to potential problems

Proban covered belt and hose offers flame protection for prolonged life

CE approved DIN EN 12941: 2009 TH2P R SL - PAPR

12 months manufacturer’s warranty for blower unit,
6 months for battery

Special Offer Prices

*Standard Version (Without Auto Lens) £259.00
( £310.80 inc VAT ex delivery)

Standard Version with 2400 Auto Lens £299.00
 ( £358.80 inc VAT ex delivery)

*Grinding Visor Version (Without Auto Lens) £275.00
 ( £330.00 inc VAT ex delivery)

Grinding Visor Version with 2400 Auto Lens £345.00
( £414.00 inc VAT ex delivery)

* Helmet accepts standard 90 x 110 mm fixed
shade glass lens instead of auto lens.


Order on-line by phone or by post

Hover over image to enlarge
Grinding Version of TL Multiview Helmet
Hover over image to enlarge
2400 Auto Lens Front and Rear Views
Hover over image to enlarge Hover over image to enlarge

TL Multiview Helmet Features

Overhead air duct with specially designed flute
to reduce the effects of ‘dry eye’

Proban face seal to maximise life and comfort

Unique bayonet coupling for a perfect connection between hose and helmet

Carbon Finish

Comfort headgear with pivot pad

Lens can be set to shades 9 to 13

Lens will automatically switch to shade 4
when welding stops.

IRUV Shade 5 side windows offer increased peripheral vision and safety

High-Low sensitivity dial

3 independent sensors for better arc detection

Variable delay dial (0.1-0.9s)

Switching speed: 0.4ms

Suitable for all arc and TIG welding applications
>15 amps

Lens size 90 x 110 mm Viewing area - 98 x 40 mm.

Designed to accommodate a dust mask.

Low cost spares

2 year warranty on helmet and lens unit.

Grinding Visor Option

WV10 Grinding Visor CE approved
EN 175 / EN 166 - B rated