Welcome to UKWelder Welding Caps Welding Helmets Pioner Overalls Welding Gloves
UKWelder Shop
Welding Hoods Welding Leathers Welding Helmet Spares Welding Boots

Welcome Guest ( Log In | Join the Forum )

 
Reply to this topicStart new topic
> Qualifying 150 mm thick material
bikerrod
post Apr 3 2020, 08:59 PM
Joined: 3-Dec 19



Hi all,

Per ISO 15614-1: I need to qualify 139.7 mm thick material using a single V butt weld. Does the standard allow me to just deposit 25.4 mm of filler for qualification or do I have to fill the entire groove?


Technic Al
post Apr 4 2020, 03:31 PM
Joined: 14-Oct 03



No idea what that ISO says.....but 140mm single vee........thats going to take some welding.....what process do you intend to use?
CChive68
post Apr 7 2020, 01:08 AM
Joined: 7-Apr 20



15614:2008 page 23 table 5.
Thickness of test piece between 12-100mm gives you an ROA 0.5-2t, so to qualify a 140mm PQR ,you'd need to use a 70mm t test coupon as far as I can tell.Also,how would you do the mechanicals on a 70 t coupon, filled out to 25mm? A lot of machining involved I'd imagine? Which standard do you want to satisfy with the PQR? DNV,EEMUA,CODRES etc etc ? Be careful as there are likely to be impact and CTOD requirements at this thickness.........
Go to the top of the page
Start new topicGo to the top of the page
Click on the Lion to return to the homepage Click on the Lion to return to the homepage